Godox
固件说明
V21
1.
To add C.Fn custom settings. The transmitter’s
parameters that set by Godox APP are not
changed. And the transmitter is only for triggering
(set C.Fn-09 to on).
2017-09-02
V20.1
1.
To solve the unstable output problem of 5D4 and
650D cameras in the TTL mode.
2.
To solve the problem that M3/M5/M6 can only use
GR mode.
3.
To solve the problems which occurred on the old
camera models.
2017-07-10
V20
1.
To add the support of Canon EOS M3/M5/M6
camera
2.
To add the custom settings of forcibly sending
group setting
2017-06-26
V19
1.
To add the support of Canon EOS 5D Mark IV
camera
2.
To add the support of Canon EOS 80D camera
2016-12-01
V18
1. To support the common effects of camera and
transmitter’s FEC function. And FEB can be set on the
camera.
2016-7-18
V17
1.
The status of modeling lamp will not be sent when
pressing the Test button.
2016-06-28
V16
1.
To add the support of the new LCD panel.
2016-06-20
V15
1.
To add the triggering operation at close range:
Press the TEST Button to power the transmitter on,
holding on until the STATUS indicator lamp blinks
for 2 times. Now the wireless remote distance is
from 0 to 30 meters.
2.
To add the support of 1DX Mark II camera.
2016-06-07
V14
1.
To solve the problem that the TEST Button cannot
trigger XTR-16 receiver.
2016-04-13
V13
1.
The former C.Fn setting values are changed to
defined values.
2.
To solve the communicate problem between
transmitter and camera flash.
3.
To add the beeper control in C.Fn functions (set
C.Fn-07 to on). To see the concrete C.Fn functions,
please refer to X1C Custom Function Settings. Xlsx.
2016-03-26
