Godox WT25R Instruction Manual Download Page 11

Page: 11 / 17

Operation Instruction

1. Power Switch

Long press the power switch for 1 second to power on or off the device. When the light is on in power on
status,short press the power switch once in power on status to turn off the light, the DIM value is 0%,
short press again to resume the previous DIM value.

2. Brightness Adjustment

Short press the DIM button once to make the DIM value blinks.
Then short press the + button once can increase the DIM value by
1 unit, long press the + button can increase the DIM value quickly.
Short press the - button once can decrease the DIM value by 1
unit, long press the - button can decrease the DIM value quickly.
Finally, short press the DIM button once can exit the brightness
setting. It will automatically exit the brightness setting when the
DIM value stops blinking after 10 seconds of idle use.

Do not disassemble. Should repairs become necessary, this product must be sent to an authorized
maintenance center.
Keep out of reach of children.
Do not use the product in the presence of flammable gases, chemicals and other similar materials.
In certain circumstance, please pay attention to the relevant warnings.

Short press the FN button in CCT mode to choose CCT adjustment
or G/M adjustment.

3. CCT Mode/HSI Mode/RGBW Mode/GEL Mode/FX Mode

3.1 CCT Mode

Short press the FN button in HSI mode to choose HUE
adjustment or saturation adjustment.

3.2 HSI Mode

Short press the MOD/Bluetooth button to switch mode.

Short press the + button once can increase the CCT value by 100K or G/M value by 1 unit, long press the
+ button can increase the CCT value or G/M value quickly. Short press the - button once can decrease
the CCT value by 100K or G/M value by 1 unit, long press the - button can decrease the DIM value or G/M
value quickly. The CCT value is adjustable from 1800K to 10000K, and G/M value is adjustable from -50
to +50.

Short press the + button once can increase the HUE value
by 1° or saturation value by 1 unit, long press the + button
can increase the HUE value or saturation value quickly.
Short press the - button once can decrease the HUE value
by 1° or saturation value by 1 unit, long press the - button
can decrease the HUE value or saturation value quickly. The
HUE value is adjustable from 0° to 360°, and saturation
value is adjustable from 0 to 100.

Short press the FN button in RGBW mode to choose red light
adjustment, green light adjustment, blue light adjustment or
white light adjustment.Short press the + button once can
increase the light value by 1 unit, long press the + button can
increase the light value quickly. Short press the - button
once can decrease the light value by 1 unit, long press the -
button can decrease the light value quickly. The red
light/green light/blue light/white light value are all adjustable
from 0 to 255.

3.3 RGBW Mode

Built-in lithium battery, do not disassemble, impact,squeeze or put it into fire. If serious bulge
occurs, please do not use.
Do not leave or store the product if the ambient temperature reads over 40℃.
Please use the proper charger and follow the operation instruction.
Make sure to seal the charging port with silicone lid and then close the cover before using under
water.
Please wash it with clean water and put it in a dry and ventilated place after using in the sea.

Item List

Separately Sold Accessories

Light Clamp WT-C01

Model

WT25R

WT40R

WT60R

Light body*1, Type-C charging cable*1, Portable rope*1, 1/4” to 1” ball joint *1

Light body*1, Adapter*1, Power cable*1, Portable rope*1, 1/4” to 1” ball joint *1

Item List

DIM

MOD