background image

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 

device  may  not  cause  harmful  interference,  and  (2)  this  device  must  accept  any  interference  received,  including 

interference that may cause undesired operation. 

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's 

authority to operate the equipment. 

Note:

 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 

in  a  residential  installation.  This  equipment  generates  uses  and  can  radiate  radio  frequency  energy  and,  if  not 

installed  and  used  in  accordance  with  the  instructions,  may  cause  harmful  interference  to  radio  communications. 

However,  there  is  no  guarantee  that  interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does 

cause harmful interference to radio or television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

►  -Reorient or relocate the receiving antenna. 

►  -Increase the separation between the equipment and receiver. 

►  -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

►  -Consult the dealer or an experienced radio/TV technician for help. 

*RF warning:

This  equipment  complies  with  FCC  radiation  exposure  limits  set  forth  for  an  uncontrolled  environment.  This 

equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Summary of Contents for WITSTRO+ AD360II-N















Reviews: