background image

For Your Safety

• Always keep this product dry. Do not use in rain or in damp  

 

  conditions.
• This product contains high-voltage electronic parts. Touching 

 

  the high-voltage circuit inside it may result in electric shock. Do 

 

  not disassemble. Should repairs become necessary, this 

 

  product must be sent to an authorized maintenance center.
• Stop using this product if it breaks open due to extrusion, 

 

  falling or strong hit. Otherwise, electric shock may occur if you 

 

  touch the electronic parts inside it.
• Do not ire the lash directly into the eyes (especially those of 

 

  babies) within short distances. Otherwise visual impairment 

 

  may occur. When taking pictures for babies, keep the lash unit 

 

  at least 1 meter (3.3 feet) away from them. Using bounce lash 

 

  to reduce light intensity is also recommended.
• Do not use the lash unit in the presence of lammable gases, 

 

  chemicals and other similar materials. In certain circumstances, 

 

  these materials may be sensitive to the strong light emitting 

 

  from this lash unit and ire or electromagnetic interference may 

 

  result. 
• Do not leave or store the lash unit in places where the ambient 

 

  temperature reads over 50°C (e.g. in automobile). Otherwise 

 

  the electronic parts may be damaged.

Summary of Contents for V850II




















Reviews: