Wireless Control
With 2.4G wireless system, SL Series SL150II/SL200II have receive and control
function. Up to multiple groups of LED lights can be controlled. 32 channels and 100
wireless IDs are available with strong anti-interference capability. Please set the
channels, groups and IDs of LED light to the same as those of RC-A6 remote control
before usage.
Adjusting Channel/Group with the Remote Control
● Press the CH/GR button and the group icon blinks.
Press the“-”“+”button to choose a group (A to F, 0 to 9).
● Press the CH/GR button twice and the channel icon blinks.
Press the“-”“+”button to choose a channel (1 to 32).
Adjusting ID with the Remote Control
● Double click the CH/GR button and press the“-”“+”button to choose ID from OFF or 0
to 99.
Adjusting Light Brightness with the Remote Control
● Press the“-””+“button to adjust the light brightness.
Adjusting Color Temperature with the Remote Control (The color temperature
value of this LED light cannot be adjusted)
● Press the SET button of the remote control and the color temperature icon blinks.
Press the“-”“+”button
to adjust the color temperature.
Remote control reset:
press down "-" and "+" button simultaneously to reset.
Note: The wireless signal can be received only when the controller of LED
light is powered on.
Remote control is available separately.
Setting color temperature range
The factory setting of remote control's color temperature range is 2500-10000K.
In order to use remote control conveniently, color temperature range settings are
added: when the remote control is off, hold down the SET button and turn it on to enter
color temperature adjusting interface. Press CH/GR button to switch the lowest and
highest color temperature value and press "-" or "+" button to change the value. Press
the SET button to confirm it.
LED Video Light
Power Supply
Max Power
Color Temperature
100% Light Brightness(LUX,1M)
CRI
≈
TLCI
≈
Light Brightness Range
Operation Temperature
Channel
Group
Dimension (not included a
standard reflector)
Net Weight
SL150II
AC100V-240V (50/60Hz)
150W
5600±200K
≈
58000
96
97
10%-100%
-10°C ~ 40°C
32
16(A, B, C, D, E, F, 0-9)
34x20x16cm
2.95Kg
SL200II
200W
≈
74000
36.7x20x16cm
3.33Kg
Technical Data
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
