Godox PT-16, Manual

Page: 5 / 12

mode.
1. On the transmitter and the receiver, set the Channel Select
Switch to the same position and the Power-Control Group
Select Dial to the same grade.
2. Insert the receiver into the Wireless Control Port of the flash
unit. Then power the flash on.
3. Adjust the flash settings on your transmitter.
■ Wireless Triggering the Flash
1. On the transmitter and the receiver, set the Channel Select
Switch to the same position.
2. Insert the receiver into the Wireless Control Port of the flash
unit. Then power the flash on.
3. Press the Test Button to fire a flash. Alternatively, you can
set the transmitter onto the camera's hot shoe and press the
camera's shutter-release button to fire a flash.
Technical Data
Other Buttons power ratio. The power range is “OF, 5.0~10” or “OF,
1.0~7.0”
for studio flashes and “OF, 1/128~1/1” for shoe
1. Set Button ( SET )
mount flashes. “OF” means the flash triggering function is
Press the Set button and settings on the transmitter will be
shut down on the flash.
communicated with the flash through the receiver. Will
To disable the flash triggering of a flash group, press “ - ” and
blink for sec. on the LCD display.
“+” buttons at the same time, with the panel displaying “OF”.
Press and hold the Set button for 2 sec. to switch the power-
5. Test Button ( TEST )
ratio display mode.
Press Test Button to fire the flash. Both the indicators on the
2. Buzz Switch ( BUZZ )
transmitter and the receiver will blink.
Press the Buzz Switch to turn the buzzer on or off. When the
buzzer is turned on, will be shown on the LCD display.
3. Modeling Lamp Switch / AF-Assist Beam Switch ( LAMP )
Using the Trigger Set
Press the switch to turn the modeling lamp or AF-assist
beam on or off. When the lamp or beam is turned on, will
■ Wireless Adjusting Flash Settings
be shown on the LCD display.
The trigger set can wireless adjust the following settings: the
4. < - >< + > Button
flash power ratio, the on-or-off of the buzzer and the modeling
Press the < - > or < + > button to decrease or increase the
lamp or the AF-assist beam, as well as the power-ratio display
Connect/Disconnect PTR-16S
Proper Improper
Disconnection Way
Connection