Godox LED500, Instruction Manual

Page: 9 / 11

Other Operation Tips:
●
Pressing the ON/OFF button on the remote control can turn on/off all the LED groups.
●
Pressing the “SET” button on the remote control for 2 seconds can turn on/off the
current LED group.
●
The remote control will auto power off after four hours of idle operation.
Tips of Using Remote Control:
(
1)When using the White Version LED500W, please set the color temperature of
the remote control as 5600K constantly;
(
2)When using the Yellow Version LED500Y, please set the color temperature of
the remote control as 3300K constantly;
(3)Please remove the battery if the light will not be used for an extended period
of time.
4. Replacing A Color Filter
●
Pinch the edge of the color filter
(
02
)
and pull it
out upwardly.
●
Insert a new color filter in and push it downwardly
.
Then the color filter is securely in position.
What’s in the Box of LED500?
Included Item
LED Video Light
Power Adapter
Diffusion Filter
Yellow Filter
Blue Filter
NO
.
1
2
3
4
5
LED500W
1 PC
1 PC
1 PC
1 PC
1 PC
LED500C
1 PC
1 PC
1 PC
NO
NO
LED500Y
1 PC
1 PC
1 PC
NO
NO
LED Video Light Power Adapter
* Product design and specifications are subject to change without notice.
Technical Data
LED500
Video Light
Lithium Battery
DC Power Supply
Channel
Group
Power
Color Temperature
Brightness(LUX)
Light Brightness
Range
LED Beads Quantity
Operation Temperature
Dimension
Net Weight
White Version
LED500W
SONY: NP-F970*2 lithium battery) (
(sold separately)
13~16.8V
16
6 groups A B C D E F) ( , , , , ,
Max. 32W
5600K±300K
2900 (1m)
10%~100%
504
-10~50 °C
390mm*300mm*60mm
1.44kg
Changeable Version
LED500C
3300K~5600K ±300K
2900 (1m/4200K)
1450 (1m/3300K)
1450 (1m/5600K)
3300K/5600K :10%~100%
3400K~5500K :25%~100%
5600K 252
3300K 252
Yellow Version
LED500Y
3300K±300K
2900 (1m)
10%~100%
504
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.