Godox LED1000, Instruction Manual

Page: 9 / 11

Other Operation Tips:
●
Pressing the ON/OFF button on the remote control can turn on/off all the LED groups.
●
Pressing the “SET” button on the remote control for 2 seconds can turn on/off the
current LED group.
●
The remote control will auto power off after four hours of idle operation.
Tips of Using Remote Control:
(
1)When using the White Version LED1000W, please set the color temperature of
the remote control as 5600K constantly;
(
2)When using the Yellow Version LED1000Y, please set the color temperature of
the remote control as 3300K constantly;
(3)Please remove the battery if the light will not be used for an extended period
of time.of time.
4. Replacing A Color Filter
●
Pinch the edge of the color filter
(
02
)
and pull it
out upwardly.
●
Insert a new color filter in and push it downwardly.
Then the color filter is securely in position
.
What’s in the Box of LED1000?
Included Item
LED Video Light
Power Adapter
Power Cord
Diffusion Filter
Yellow Filter
Blue Filter
NO .
1
2
3
4
5
6
LED1000W
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
LED 1000C
1 PC
1 PC
1 PC
1 PC
NO
NO
LED1000Y
1 PC
1 PC
1 PC
1 PC
NO
NO
LED Video Light Power Adapter Power Cord
*
Product design and specifications are subject to change without notice.
Technical Data
LED1000
Video Light
Lithium Battery
DC Power Supply
Channel
Group
Power
Color Temperature
Brightness(LUX)
Light Brightness
Range
LED Beads Quantity
Operation Temperature
Dimension
Net Weight
White Version
LED1000W
14.8V Lithium Battery(SONY BP-L model lithium battery)
(sold separately)
13~16.8V
16
6 groups(A,B,C,D,E,F)
Max. 70W
5600K±300K
4400(1m)
10%~100%
1024
-10~50 °C
430*460*100mm
2.44kg
Changeable Version
LED1000C
3300K~5600K ±300K
4400 (1m/4200K)
2200 (1m/3300K)
2200 (1m/5600K)
3300K/5600K :10%~100%
3400K~5500K :25%~100%
5600K 512
3300K 512
Yellow Version
LED1000Y
3300K±300K
4400(1m)
10%~100%
1024
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.