background image

1.

 

Damage caused by burning fuels other than those for which the unit is intended. 

2.

 

Any defect or deterioration caused by a fall, shock, negligence or lack of supervision and 
maintenance. 

3.

 

Deterioration of parts caused by abnormal conditions (back draft, dampness, storm 
effects, pressure and depression of non conform, temperature shock etc). 

4.

 

Abnormal usage of the unit (using a unit with the door open, running it on maximum for 
extended periods)or abnormal usage of the appliance in conditions that are different 
from the conditions in our manual for which it has been designed, for example non 
observation of our technical manuals (wrong electric connection, running an empty 
boiler etc)  

5.

 

Any defect, deterioration or accident caused by fall, shock, negligence, lack of the 
buyer’s supervision or maintenance. 

6.

 

Any modifications or transformations made to the unit and non-compliance with 
installation norms. 

 
Godin SA will not be responsible for any installation, assembly, dismantling costs and consequential 
removal of the appliance. 
 
Consequently Godin SA, cannot be held responsible for any materials loss or human accidents, being 
a result of incorrect installation non – observing the legal provisions and regulations (for example, 
lack of ground connection, incorrect draft of the chimney etc...) 
 
In order to constantly improve our products, we reserve the right to modify our appliances without 
prior notice. All the dimensions and specifications give are subject to variation according to technical 
requirements. 
In case of a problem occurred during your guarantee period, please contact your retailer providing 
him with a copy of your bill and guarantee containing the appliances product codes, the retailers 
stamp, the date of the appliance installation. 
 

 

 

 

Summary of Contents for 660125

















Reviews: