23
3-8 Indication
Power on alert:
After power-on the scanner will generate an alert signal to indicate a successful
self-test.
LED indication:
After each successful reading, the LED above the scanner will light up to indicate
a good barcode reading.
Beeper indication:
After each successful reading, the scanner will beep to indicate a good
barcode reading, and its beep tone duration is adjustable.
Duration of successful decoding:
This parameter can be adjusted for a good reading upon
favorite usage.
Volume of beeper:
This parameter can be adjusted for different level of the volume of the
beeper.
Multiple-scan setting
Single-scan setting
Option barcode
Option
Alpha. entry
Power on alert
Disable
00
Enable
01*
*
LED indication
Disable
00
Enable
01*
*
Beeper indication
Disable
00
Enable
01*
*
Duration of successful decoding
01-99 (10 ms )
01-99
05*
*
Volume of beeper
Low
00
Middle
01
High
02*
*