manualshive.com logo in svg

Godex EZ-1000 Plus, Programmer'S Manual

Share
Download
Godex EZ-1000 Plus Programmer'S Manual Download Page 18

~Q±x - Row Offset Adjustment 

Syntax 

~Q±x 

Parameter X=-100 

~ 

+100 

Description 

If the printing does not appear in the same place on every label, this command instructs the 
printer to print label formats. The “+n” move the position that the format specifies upward, 
and the “–n” move the position downward. 

 

~Rx - Rotate printing 

Syntax 

~Rx 

Parameter 

x=label width (unit: mm), the input range is defined by the specification of printer models.   

Description 

Rotate the label format 180-degrees when printing (refer to page36). To return to the 
original print direction, set the x value greater than the max width of model’s specification. 

 

~S,CHECK - Status immediate response command 

Syntax 

~S,CHECK 

Parameter None 
Description 

The HyperTerminal will show the status of printer in “

aa,nnnnn<CR><LF>

“ format. 

aa = printer status information: 

00 – Ready 
01 – Paper out 
02 – Paper jam or miss gap 
03 – Ribbon out 
04 – Print head is up 
05 – Rewinder full 
06 – Memory is full 
07 – filename can not be found 
08 – filename is repeat 
09 – Syntax error 
20 – Pause 
21 – In Setting Mode 
22 – In Keyboard Mode 

50 – Printer is printing 

nnnnn = number of remaining labels, the value is from 00000 to 99999 
*Note: Before using this command, the “^XSET,IMMEDIATE” (Set immediate response 
on/off) command should be turned on. 

 

~S,n - Analogue press control keys 

Syntax 

~S,n 

Parameter 

n = FEED 
n = PAUSE 
n = UNPAUSE 

Description 

This command can analogously press function keys on the printer. 
Key in “~S,FEED” via COM port can generate the same action as pressing the “FEED” key.
Key in “~S,PAUSE” via COM port and the printing will be paused.   
Key in “~S,UNPAUSE” via COM port and the printing will continue.   

 

~T - Print head testing 

Syntax 

~T 

Parameter None 
Description 

Print a pattern for the user to determine if the print head is damaged (refer to page38). 

 

~V - Print Self-Test page 

Syntax 

~V 

Parameter None 
Description 

Print out the Self-Test page. 

 

 

17

Summary of Contents for EZ-1000 Plus












































Reviews:

No comments

Brands by name

Popular brands

Load more brands