Goddess WFD 1025 M8, Instruction Manual

Page: 4 / 24

ENG
ENG - 4
SECTION 2: INSTALLATION
You must pay attention to the following issues before using your washing machine.
REMOVAL OF TRANSPORTATION SCREWS
• Transportation screws, which are located at the back side of the machine, must be removed
before running the machine.
• Loosen the screws by rotating counterclockwise by a suitable wrench. (DIAGRAM-1)
• Remove the screws by pulling them. (DIAGRAM-2)
• To the holes where the transport screws have been removed, insert the plastic transport
screw taps found in the accessories bag. (DIAGRAM-3)
• The transportation screws, that have been removed from the machine should be kept in hand
for any other transportation necessities.
ADJUSTMENT OF FEET
• Do not install your machine on rugs or similar surfaces.
• For your machine to work silently and without any vibration, it should be settled on a flat,
non-slippery and tough ground.
• You can adjust the balance of your machine from its feet.
• First, loosen the plastic adjustment nut.
• Adjust by rotating the feet upwards or downwards.
• After the balance has been reached, tighten the plastic adjustment nut again by rotating it
upwards.
• Never put cartons, wooden blocks or similar materials under the machine to balance the irre-
gularities on the level of the ground.