ENg
ENG - 19
POWER SUPPLy
The refrigerator is only applied with power supply of single phase alter
-
nating current of (220 - 240) V~/ 50Hz; If fluctuation of voltage
in the district user is of so large that the voltage exceeds the above
scope, for safety sake, be sure to apply a.c. automatic voltage regulator
to the refrigerator. The refrigerator must employ a special power socket
instead of common one with other electric appliances. Its plug must
match the socket with ground wire.
POWER LINE CORD
The cord should be neither lengthened nor folded into coil during
operation. Moreover, it is forbidden that cord is kept close onto
the compressor at the back of the refrigerator, the surface temperature
of which is quite high when operating. Touching with it would deactivate
the insulation or cause leakage for electricity.
PROTECTION FROM MOISTURE
Avoiding placing the refrigerator in a place where heavy moisture is pre
-
sent so as to minimize possibility of rusty for its metal parts. Still more,
the refrigerator is forbidden to be directly sprayed by water, otherwise,
poor insulation and current leakage would occur.
PROTECTION FROM hEAT
The refrigerator should be far away from any heat source or direct
sunshine.
FIxINg STAbLE
Floor on which refrigerator will be placed must be flat and solid. It
should not be laid on any soft material such as foam plastic, etc. If
the refrigerator is not on the same level, adjust the screws suitably.
The refrigerator should not be placed near anything which may echo.
