ENG
ENG - 19
R600A – IZObUTANE
This appliance does not contain CFCs (the cooling circuit contains R600a
- ISOBUTANE).Isobutane is a natural gas that doesn’t affect the environment, but it is
inflammable. Before connecting the equipment to the mains, it is therefore indispensable to
check that the cooling circuit tubing is not damaged. For every 8 grams of cooling fluid, there
must be a minimum of 1 cubic metre of space in the room where the appliance is installed.
In the event of a leakage of cooling fluid, make sure that no flames or other sources of ignition
are allowed to get near the leakage point.
INSTALLATION
The equipment must be installed by two people in order to avoid damage to persons and things.
If the equipment has suffered damage during transport, immediately inform the supplier before
connecting up. Wait at least two hours after installation before putting the appliance into
operation, to allow the cooling fluid to reach optimum efficiency. The equipment must be put
in a dry, well ventilated place. It must be installed on a flat, stable surface. Adjust the levelling
feet if necessary. There must be at least 90 mm space between the back of the equipment and
the wall (Fig. 1). Any shelving or cupboards over the appliance must be at least 800 mm from
the cover. Ambient temperature considerably affects energy consumption, so the equipment
shouldn’t be exposed to direct sunlight or placed next to heat sources such as heaters, stoves,
cookers, etc. Check the climate classification on technical data plate on the
back of the equipment.
“SN” (operates at ambient temperatures between) +10° C and +32° C
“N” (operates at ambient temperatures between) +16° C and +32° C
“ST” (operates at ambient temperatures between) +16° C and +38° C
“T” (operates at ambient temperatures between) +16° C and +43° C
IMPORTANT:
Make sure there is easy access to the power outlet so that the plug can be removed when necessary.
fig. 1
