EN - 104
EN
Dishwasher Features
1. Salt Container
2. Detergent Dispenser
3. Cutlery Basket
4. Filter assembly
5. Rinse Aid Dispenser
6. Spray Arms
7. Cup Shelf
8. Basket
9. Inlet pipe connector
10. Drain pipe connector
4. PRIOR USING FOR THE FIRST TIME
Before using your dishwasher for the first time:
à
Set the water softener
à
Pour ½ litre of water inside the salt container and then fill with dishwasher salt
à
Fill the rinse aid dispenser
à
Fill in detergent.
A. WATER SOFTENER
à
The water softener must be set manually, using the water hardness dial .
à
The water softener is designed to remove minerals and salts from the water, whi ch
would havea detrimental or adverse effect on the operation of the appliance. The hi gher
the content of these minerals and salts, the harder your water is. The softener should be
adjusted according to the hardness of the water in your area. Your local Water Author ity
can advise you on the hardness of the water in your area.
Adjusting Salt Consumption
Step 1: Enter the status of salt adjustment
à
Close the door, within 60 second after power on, press START/PAUSE button for 5
seconds at the same time,then enter setting mode. Digital display stalls “H*”,
à
The controller factory default H4.
Summary of Contents for DTC656MW8F
