Goddess DFE1267DW10N, Instruction Manual

Page: 92 / 124

ENG - 93
ENG
ENG - 92
■ When You Go on holiday
When you go on holiday, it is recommended
that you run a wash cycle with
the dishwasher empty and then remove
the plug from the socket, turn off the water
supply and leave the door of the appliance
slightly ajar. This will help the seals last
longer and prevent odors from forming in
the appliance.
■ Moving the Appliance
If the appliance must be moved, try to
keep it in the vertical position. If absolutely
necessary, it can be positioned on its back.
■ Seals
One of the factors that cause odors to form in
the dishwasher is food that remains trapped
in the seals. Periodic cleaning with a damp
sponge will prevent this.
Attention:
WARNING!
Electrical Shock Hazard!
Disconnect electrical power before
installing dishwasher.
Failure to do so can result in death or
electrical shock.
The installation of the pipes
and electrical equipments
should be done by professionals.
8. INSTALLATION
Keep this instruction manual in a safe place for future reference. If the appliance is sold,
given away or moved, please ensure the manual is kept with the machine, so that the new
owner may benefit from the advice contained within it.
Please read this instruction manual carefully: it contains important information regarding
the safe installation, use and maintenance of the appliance.
If the appliance must be moved at any time, keep it in an upright position; if absolutely
necessary, it may be tilted onto its back.
POSITIONING AND LEVELING
1) Remove the appliance from all packaging and check that it has not been damaged during
transportation. If it has been damaged, contact the retailer and do not proceed and further
with the installation process.
2) Check the dishwasher by placing it so that its sides or back panel are in contact with
the adjacent cabinets or even with the wall. This appliance can also be recessed under
a single worktop.
3) Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of
the appliance may be adjusted until it reaches a horizontal position (the angle of inclination
must not exceed 2 degrees). If the appliance is levelled correctly, it will be more stable and
much less likely to move or cause vibrations and noise while it is operation.
CONNECTING THE WATER AND ELECTRICITY SUPPLIES
Connection to the water and electricity supplies should only be performed by a qualified
technician.
The dishwasher should not stand on top of the water hoses or the electricity supply cable.
The appliance must be connected to the water supply network using new piping. Do not use
old piping.