ENG
ENG - 57
Starting Operation
When the unit has finished cleaning, it will begin searching for the docking station to begin
charging. If the unit cannot locate the docking station and charge successfully after the
power is exhausted, you should manually put the unit back to the station for charging. Nor
-
mally the power indication lamp will flash green when the unit is being charged. But if the
power indication lamp doesn‘t go on, it means that the unit is exhausted of power and you
should charge the unit manually: Switch off the power and plug the DC adaptor into the unit
to do the charging. At this time the power indication lamp will flash green. No matter if the
unit is charged manually with the adaptor or at the docking station, when the unit is fully
charged, the power indication lamp would stay green.
You should switch off power switch of the unit when you want to charge the unit by your
self. Also you can manually charge the unit for about 5~10 minutes, and then put the unit
back to the docking station to be charged automatically. And there will be two circumstan
-
ces for automatic charging:
- UNIT POWER SWITCH OFF: No matter what working time mode you‘ve set in the vacu
-
um, it will not go and clean even when it is fully charged.
- UNIT POWER SWITCH ON: When the time of cleaning is up, the unit starts to clean in
mode „ Max „ After completing the work, the unit would find its way back to the station and
do the charging. And at the next time it starts cleaning, it will also work in mode „ Max „.
If you don‘t want to have the unit do the automatic charging, you could press the selection
button on unit or use the remote control until the indication lamp of „ Max „, „ M „ or „ S „
flashing.
USING DUSTING PAPER
NOTE: Do not use mopping function on the carpet. At the same time you have to remove the
side brushes to prevent them from damage.
1)
2)
3)
