EN | 31
D Car power supply unit 12V
E USB-microUSB computer cable
OPERATION
Power supply and charging
The navigation device has a built-in lithium-ion battery, it should be charged before use.
When in use, we recommend keeping the device connected to the car's power supply
all the time (12V lighter connector). For this purpose, connect the miniUSB connector
of the power supply unit to the navigation port, and insert the power supply unit to the
car's 12V socket.
Installation of microSD memory card (optionally)
Do not insert or remove a card during the device's operation. To install the card: insert
the card and press it to the end until it clicks. Pay attention to position the card correctly,
this is shown by an icon on the device. Press the card again to take it out from the slot.
