1.Turn on the board
2.Press and hold the button, the lights slowly flashing
3.Turn on the remote controller and press the binding button
4.If signal indicator and button lights are both flashing, that means pairing
is ok.
You can test pairing by placing the skateboard on its side and pushing up on
the motion controller unit the wheel motors engage and the wheels start spin-
ning. Push backwards on the motion controller to stop the spinning.
The board is ready to use.
•Before first use, please power up the unit and check that everything is run-
ning smoothly
•Engage the brake by pressing downwards on the motion joystick
•Step onto the board, find the balance and gently push up on the joystick until
the board starts rolling
•The more You push up on the joystick, the faster You will drive
•Pushing downward on the joystick will engage the breaks
•Practice going forward slowly until You feel comfortable, then try turning
•You should place the foot that You kick with to the rear of the board and Your
other foot to the front of the board
•Learn to turn by gently leaning Your feet forwards to turn left, and backwards
to turn right whilst moving forwards
•Remember – Practice makes perfect!
4
Summary of Contents for CITY BOARD 65 CYCLOPS BLACK
Page 1: ...Quick Start Guide CITY BOARD 65 CYCLOPS BLACK...
Page 50: ......
