Quick Start Guide - GB
6
Please refer to the following table to adjust your picture size
and distance (from the lens to screen)
Distance
4:3
16:9
50cm
100cm
150cm
200cm
27.5cm
54cm
82.5cm
111cm
41cm
63cm
21cm
84cm
Turn on the projector
1 .Before using the remote control, fix two batteries in it.
2.Ensure that the power cable is connected.
3 .Press the power key on the remote control or panel
4. After a few seconds , the lamp begins to work.
5. If using for the first time, the image may appear blurry.
If the image is blurry, turn the lens clockwise, then turn it co-
unter clockwise slowly. When the whole image is as clear as
the middle area of it, it will be the best position of the lens.
6. You may also re-setup the system parameters anytime and
use different ports after selecting “Menu”.
Turn off the projector
1. When the projector is on, pressing power key on remote
control or on the panel will turn off the projector.
Remote control (Scheme F)
1. Mute
2. Power (On, Off)
3. Main menu
4. Introduction
5. Forward/back
6. Next/last page
7. VGA cable
8. HDMI cable
9. USB cable
10. SD
11. Exit
12. Number selection
