3
Device Hardware specification
Description of device, LED codes information.
Looking at the device flashing LEDs user can check actual device status:
Blue LED --- indicates actual status of GSM signal:
Status
Meaning
Flashing (2 times / second)
No SIM card or no GSM network
Flash once every 8s
GSM receivers work well and standby
Red LED --- charging status
Note
: When charging device with very low battery level, red LED may not light up.
Green LED --- indicates GPS signal status
Status
Meaning
No light
Works, positioning fixed
Flashes
Works, no position fixed or no GPS signal
Device buttons and LED's overview
Device buttons description
Note
Before using GOCLEVER Big-I Personal, in order to extend its battery life, we strongly recommend to charge device
for about 12 hours.
Status
Meaning
Light up
Charging
Micro-Liang
Charging complete
Button
Usage
Power Switch
Press button for 3-5s to turn on and turn off device.
SOS button
Press button for 3-5 seconds, device will start
vibrating, then send SOS information to GOCLEVER
Big-I Server.
NOTE
it is needed to setup SOS alert
in settings window of user panel (check user panel
manual)
DC port
Power Switch
GSM lights
GPS light
Power LED
SOS Key
