IN ORDER TO PROTECT THE BATTERY
When the unit is powered by the battery, standby operation is invalid.
When the battery is low, the system will prompt “LOW POWER” and the POWER lamp will blink.
When the battery has run out, the system will prompt “NO POWER” and the POWER lamp will
blink. After 1 minute, the system will shut down.
When the battery is sufficiently charged the steady POWER lamp will be on.
BATTERY REMOVAL
Unscrew the screws
holding the cover
on, and remove the
battery cover on the
rear panel.
Take out the battery.
Disconnect.
The specification presents only as a reference. The value of weight and size are approximation.
Our product is continually improved and the specification and function may be changed without prior notice.
GOCLEVER Sp. z o. o. hereby declares under our sole responsibility that the product is in conformity with following directives:
RED (2014/53/EU), LVD (2014/35/EU), EMC (2014/30/EU).
Full document (declaration of conformity) is available for download from
www.goclever.com
in product page.
CORRECT DISPOSAL OF ELECTRICAL &
ELECTRONIC EQUIPMENT
(Applicable in the European Union and other European countries with separate collection
systems)
This marking indicates that at the end of its working life this product should not be disposed
of with other household waste in the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate this from other types of
wastes and recycle it responsibly to promote the sustainable reuse of material resources. To
dispose of your used device, please use the return and collection systems available in your
area or contact the retailer where the product was purchased.
EN
BATTERY
6
