Turn GoBone Off
GoBone goes to sleep automatically after it's disconnected from the app. If your GoBone is in
Auto Play mode, you'll need to stop Auto Play and disconnect from the app so that GoBone can
go to sleep. To wake your GoBone again, just tap it twice in the center of the shell.
Install Treats in the Wheels
We designed the wheels so that you can place a treat between the white cap and the blue lip.
We did this in order to avoid the treats spilling out after the GoBone rolls just a few feet. You
may need to break the treat into pieces in order to get them to fit.
Clean GoBone:
●
GoBone Wheels & Shell:
Scrub with a brush under warm water using mild, non-toxic
detergent and rinse thoroughly. Inspect for wear while cleaning.
●
GoBone Core:
Gently wipe with a damp paper towel and dry thoroughly. Do not
submerge in water.
GoBone Wheel & Shell Replacement:
Dog’s love to chew, toss and slobber all over GoBone. Over time, GoBone’s exterior may need
to be replaced. Visit mygobone.com to purchase GoBone Wheel & Shell Replacement Kit,
which contains all of GoBone’s external components. We recommend replacing the GoBone
Wheels & Shell at the same time to ensure top performance.
LED Light Notifications
Pulsing Blue
Your GoBone is on and waiting to connect to your smartphone
Solid Blue
Your GoBone is connected to your smartphone through the
GoBone App.
Pulsing Green
Your GoBone is charging.
Solid Green
Your GoBone is fully charged.
Solid Yellow
Auto Play is enabled.
Pulsing Red
Your GoBone needs to be charged.
Pulsing Purple
Your GoBone is downloading the most current software
update, which usually takes about 2 minutes.
