ECO Spot LED A10 User Manual
Page 2
Copyright © 2015 Globus New Media LLC
Focusing
Mounting Bases
Gobo Placement
(see illustrations below)
The Projector uses D-Size gobos
, (
see Specifications for Gobo Dimensions).
See the
illustration below
Power up the projector.
Focus the projection by twisting the lens in the front of the Lens Barrel in and
out until the image is well focused. When used for the first time, the lens will
often need to be twisted outwards many rotations to reach the focusing point.
To adjust the rotational gobo position, twist the complete Lens Barrel. You may
have to re-adjust the focus.
The projector is available with different mounting bases:
Rectangular Wall Base
that can be used to place the projector onto a desk,
attach to a wall or ceiling.
Track Base
for Halo and compatible systems.
Round Wall Base
(special order)
These bases are order options and cannot be interchanged in the field.
If the projector is on, turn it off.
Even though this is a LED projector, the gobo can get hot, please wait a few
minutes for the gobo to cool down if the projector was on.
Unscrew the Lens Barrel.
The gobo sits inside the Lens Barrel. Push the two pins of the gobo retaining
ring together and pull out the retaining ring. Carefully remove the old gobo
and replace it with the new gobo.
If you have a glass gobo, place the more reflective side towards the light bulb.
Replace the retaining ring and make sure it evenly pushes the gobo all the way
back.
Replace the Lens Barrel but don’t screw it in tightly.
Turn on the projector and adjust the rotational gobo position by twisting the
Lens Barrel.
Focus the image by twisting the front lens in or out.
