Goblin IB86000, Instructions Manual

Page: 4 / 8

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Components of your iron
Shot of steam button
Spray button
Variable steam control
Filling hole
Spray nozzle
Soleplate
Water tank
Temperature control dial with indicator
Temperature indicator light
Iron Base stand
(Certain models only)
Power unit
Iron stand
3 position base switch
= Cordless ironing
= Storage/lock position
= Corded ironing
4
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Filling
1 Make sure that the iron is not plugged
in and then set the variable steam
control
to the lowest position before
filling the iron with water.
2 Fill the water through the filling hole
into the water tank , using the
beaker provided.
In hard water areas the use of distilled
or demineralised water is
recommended.
Never use battery topping-up fluid
or water containing any substances
like starch or sugar, or defrosted
water from a refrigerator.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Before use
Note : The steam facility should only
be used on garments which are suitable
for ironing at the 3 dot setting.
Textiles and clothes are supposed to
carry ironing instructions. If they don’t you
should follow the fabric guide on page 3,
but be sure to test the temperature by
ironing the hem of the garment or similar
area first.
If you turn the control dial down from a
hot setting to a cooler setting, wait until
the iron temperature has stabilised before
you continue ironing.
Cordless (certain models only)
STEAM IRON 31/5/02, 11:47 AM 4