Goalsetter Systems Escalade Sports RK060, Assembly Instructions Manual

Page: 14 / 26

HARDWARE NEEDED (ACTUAL SIZE)
Step 1:
With the help of another adult lift Arm (#3) and align
the upper arm holes with the Pole holes. Screw
Top Machine Bolts (#17) first as shown in Detail A .
14
Step 2:
Finish securing arm by installing the two Bottom Bolts
(#18) . See Detail B .
Step 3: Install Board Arm Cap (#4) into the side slots on the Upper
Arm (#3) until it snaps on both sides. See Detail C .
1/2-13x1.5 Flat Socket
Cap Screw-Zinc
1B-7217-00
QTY. 2
17
3/8-16 x 1” Button
Head Screw - Zinc
1B-7221-00
QTY. 2
DETAIL A
DETAIL B
DETAIL C
18
17
4
18
17
4
3
7/32” & 5/16 Allen Wrenches
or Allen Key Sockets
TOOLS NEEDED
Note: Tighten both bolts #17 before starting the next step.
NOTE: Tighten both
bolts #17 before starting
the next step.
NOTE: Arm Cap (#4 ) tabs
should fully snap into the
arm slots on both sides.
18
NOTE: If needed use a wood
block and rubber mallet or
small hammer to
gently tap
the flat section of the cap as
shown.
DO NOT hit the cap
directly with hammer.
Slot in arm
for Cap #4