P3
(RIM ASSEMBLY)
P4
H1
P2
H2
P1
DETAIL 1
DETAIL 2
All Rights Reserved
s
tr
o
p
S
e
d
a
l
a
c
s
E
19
0
2
©
3
NOTE: After continued play, if Rim sags, slight
tightening of the H5 Breakaway Rim Lock Nut
may be required. Do not overtighten Nut as this
would DEFEAT the breakaway function of the rim.
STEP 1
Insert the three Bolts
H1
through Back plate
P2
,
Backboard
P1
, Rim Assembly
P3
and the
three Nuts
H2.
Tighten with
T1
Wrench until Rim is secure but
DO NOT
over tighten
.
STEP 2
Attach Net
NOTE: Net does have a top and bottom, The loops go to the top.
P4
to Rim Assembly
P3.
Loop net over
Rams Horns
and tuck under as shown in
Detail 1
and
Detail 2.
NOTE
Peel protective covering from backboard before assembly.
:
backboard
.
Be careful not to scratch
Protective Foam on
the back, Steel plate
towards Backboard
NOTE: Red
Steel this side
Note:
Be sure to install
Nuts H2 on this side
