Charging Your Go-tcha Clip
Using Your Go-tcha Clip- Auto Catch
To turn the ‘Auto-catch’ function on, press the Go-tcha Clip button until ‘
Auto-catch
ON’
is selected.
If you have Auto Catch on:
Go-tcha Clip will vibrate and animate the screen to show a successful/unsuccessful catch
Go-tcha Clip will vibrate and animate the screen to show it has successfully/unsuccessfully
collected the items and how many items it has collected at a Pokéstop
To turn ‘Auto-catch’ off, press and hold the Go-tcha Clip button until ‘
Auto-catch
OFF
’
is selected.
Go-tcha Clip Screens
Auto-catch
new Pokémon
OFF
Auto-catch
new Pokémon
ON
Auto-catch
OFF
Mystery
Item
Auto-catch
ON
Once connected you can check that your Go-tcha is charging by pressing the screen button. The
charging animation will appear to confirm that the Go-tcha is charging. If there is another Go-tcha
animation running, then wait for the animation to stop and the screen is blank - now press the screen
button to confirm the charging animation is displayed.
The Go-tcha Clip charges via a magnetic USB
cable. Simply remove the Go-tcha Clip unit from
the clip case, connect the magnetic cable and
connect the other end to a USB power source.
The cable will only connect one way around - you
will feel the magnets indicating the correct
orientation as you position the connector. Simply
return the Go-tcha Clip to the case when
fully charged.
A full charge takes approx. 1 hour and lasts for
approx. 12 hours with continuous use. Standby
time is approx. 48 hours.
