B l u e B o x – M e n u O p e r a t i o n
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 34 / 96
www.go-sys.de
8.1.2 Parameter Display 6-way
Here, as an example, the parameter display of more than 6 sensors.
The measurement values of the first 6 sensors are displayed for 6 s, the order is alphabetical
∗
. Thereafter the
display switches in a cycling way to the display of the next sensors.
Status messages appear instead of the measurement value and are marked in colour:
yellow = Status 0 | orange = Status 4, 50, 51 | rot = all others see
Appendix J – Status Messages
In comparison to the parameter display 1-way status messages are displayed shortened.
In the upper left corner you see the page number of the current display and the number of pages
(in this case 1/2).
In the upper right corner time and date is displayed.
Buttons
Switches to the parameter display of the previous sensor.
Switches the cycling of the Parameter display off.
Switches to the parameter display of the next sensor.
Switches the cycling of the Parameter display off.
Switches the cycling of the parameter display on and off.
The button is also a status indicator.
In the maintenance service mode this button appears, it calls up the
maintenance service menu. see 8.2.4 Service Mode (Maintenance)
At current user-defined error messages, this button appears. see
8.1 Parameter Display
Switches to the Main menu.
∗
The sequence is that of the ASCII numeric value, i. e.: Special characters
numbers
capital letters
lower case letters
1/2
oxygen
10 mg/l
temperature outside
18 °C
temperature inside
22 °C
air pressure
1006.91 hPa
humidity
39.8 %
pH value
11 pH
10:19:08
15.04.18
M enu
S er vi ce
S er vi ce
M enu
Settings via
8.2.1.6 Display
