B l u e B o x – M e n u O p e r a t i o n
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 32 / 96
www.go-sys.de
8 The Menu Operation
The BlueBox T4 has a colour display.
The BlueBox T4 Basic has a colour display in the newer versions, versions with a monochrome display are no
longer available.
The operation on the monochrome display is almost identical to the operation on the colour display and dif-
fers most in the measurement value display (see
8.1 Parameter Display
and following).
8.1 Parameter Display
The following can be displayed:
•
the
internal sensors and actuators
1
•
the
virtual (calculated) sensors
•
the connected external
CAN-bus sensors
•
the connected external
CAN-bus actuators
1
Selection of the displayed sensors/actuators:
•
Only selected sensors and actuators are displayed.
Selection via
8.2.2.1 Sensor menu
and
8.2.4.1 Actuator menu
•
All sensors and actuators are displayed.
•
All sensors are displayed.
The selection of the displayed sensors/actuators is made via
8.2.1.6 Display
.
When there is no user activity in all other menus (except input menus) for 2 minutes, the software
switches back to the parameter display.
At current user-defined error messages, this button appears.
This button opens the menu of the current user-defined error messages.
The definition of the user-defined errors is done with the program AMS
2
.
Switches to the next current error message or back to the parameter display.
Resets the error and switches back to the parameter display.
1
The status of an actuator can also be understood as a measurement value.
2
The program AMS is part of the BlueBox PC Software.
1/2
Sauerstoff
10 mg/l
Temperatur aussen
18 °C
Temperatur innen
22 °C
Luftdruck
1006.91 hPa
Luftfeuchtigkeit
39.8 %
pH-Wert
11 pH
M enü
10:19:08
15.04.18
Wa r tung
Error 01
