C o n n e c t i o n s a t t h e B l u e B o x T S
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 64 / 76
www.go-sys.de
Appendix B – Connections at the BlueBox Version TS
The BlueBox has the following connection options:
1.
Power supply (24 VDC) via a 4-pin M12 panel plug (male)
2.
CAN-bus connection via a 5-pin M12 panel socket (female)
Connection of sensor/actuator modules via a 4-wire CAN-bus connection cable
3.
Relay 1 and 2 output connection via a 8-pin M12 panel socket (female), contact load 48 V/0,5 A
4.
Compressed air line connection. See
18 Connection of the Compressed Air Line
5.
Socket of the sensor head cable
6.
LAN connection for LAN cables in standard or cross-link design
7.
Serial interface connection (RS-232 or RS-485, switchable) and 12 VDC power supply
via a 3-pin M8 panel plug (male)
8.
Current output 1 connection via a 4-pin M8 panel socket (female), 4 to 20 mA
9.
Current output 2 connection via a 4-pin M8 panel socket (female), 4 to 20 mA
10.
Pulse input 1 connection via a 4-pin M8 panel plug (male)
PNP/NPN selectable (optional static), switching current approx. 6 mA, measurement range up to 20 kHz,
debounced up to 100 Hz
11.
Pulse input 2 connection via a 4-pin M8 panel plug (male)
PNP/NPN selectable (optional static), switching current approx. 6 mA, measurement range up to 20 kHz,
debounced up to 100 Hz
12.
Ground connection
13.
Borehole (with cap) for an antenna or cable m
odem
Modems (optional):
HSPA- modem with antenna
Analogue modem
ISDN modem
2
3
5
6
7
1
8 9
10 11
12
13
4
