I S A – A M S O p e r a t i o n
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 26 / 76
www.go-sys.de
9.2 The Sensor Setup Window of the Spectrometer
Intensity
Double-click in the AMS start window
This opens the sensor setup window. The factory default values for the spectrometer are factory preset.
Usually, the user has only to change the interval and the average.
The CAN-ID of a newer spectrometer starts with
ISA
in capital letters, e.g.
ISA00001
.
Sensor-ID of the spectrometer = CAN-ID + sensor number (uniquely defined for each sensor, factory preset)
Fußnoten
1
2
Opens the configuration window of the spectrometer.
see
9.2.1 The Configuration Window of the Spectrometer
Opens the spectra window.
see
9.2.2 The Spectra Window
Opens the spectra window.
see
9.2.2 The Spectra Window
Name
Name of the sensor,
max. 20 characters
i
s queried by other BlueBox programs.
Comment
2
Any comment text for AMS and BlueBox SQL Software
max. 20 characters
Parameter
Name of the measured parameter
max. 20 characters
1
MVR
= maximum digital Value of a Raw spectrum
2
In older software versions, here it was also possible to determine how a measurement value is stored in the database.
The setting is now made via the <All values> button.
Formula input field
The field is inoperable here.
MVR
1
of the last captured raw spectrum
with capture time.
Firmware version of the module
