background image

QTY

PARTS DESCRIPTION

10

3/8” X 1 ¼” T-BOLTS

20

3/8” X 1 1/4” HEX BOLTS

30

3/8” HEX NUTS

30

3/8” LOCK WASHERS

42

3/8” FLAT WASHERS

1

D361291D DRIVER SIDE STEP 

1

D361291P PASSENGER SIDE STEP

1

498302 DRIVER FRONT BRACKET

1

498362 DRIVER FRONT SUPPORT BRACKET

QTY

PARTS DESCRIPTION

1

498502 DRIVER REAR BRACKET

1

498562 DRIVER REAR SUPPORT BRACKET

1

498304 PASSENGER FRONT BRACKET

1

498364 PASSENGER FRONT SUPPORT BRACKET

1

498504 PASSENGER REAR BRACKET

1

498564 PASSENGER REAR SUPPORT BRACKET

2

498124 DRIVER & PASSENGER CENTER BRACKETS

PASSENGER SIDE FRONT MOUNTING AND SUPPORT BRACKET 

STEP-1

 LOCATE AND REMOVE THE TAPE COVERING THE OBROUND HOLE IN THE BODY

ROCKER PANEL. 

STEP-2

 ATTACH 498304 PASSENGER FRONT MOUNTING BRACKET TO THE BODY ROCKER

PANEL USING THE 3/8” T-BOLT, WASHERS AND HEX NUT AS SHOWN.

FODI7.003.I

1

INSTALLATION INSTRUCTIONS

DOMINATOR III SERIES SIDE STEPS PART NUMBER D361291 (B) 

06-09 DODGE RAM 1500, 2500, 3500 MEGA CAB P/U 4DR 2/4WD

Do not attempt to install this product on any vehicle other than the one it is designed for and listed above!

PARTS LIST

Summary of Contents for D361291

Page 1: ...ER REAR BRACKET 1 498564 PASSENGER REAR SUPPORT BRACKET 2 498124 DRIVER PASSENGER CENTER BRACKETS PASSENGER SIDE FRONT MOUNTING AND SUPPORT BRACKET STEP 1 LOCATE AND REMOVE THE TAPE COVERING THE OBROUND HOLE IN THE BODY ROCKER PANEL STEP 2 ATTACH 498304 PASSENGER FRONT MOUNTING BRACKET TO THE BODY ROCKER PANEL USING THE 3 8 T BOLT WASHERS AND HEX NUT AS SHOWN FODI7 003 I 1 INSTALLATION INSTRUCTION...

Page 2: ...D TO THE FLANGE OF THE MOUNTING BRACKET USING THE 3 8 T BOLT 3 8 X 1 1 4 HEX BOLTS WASHERS AND NUTS AS SHOWN PASSENGER SIDE CENTER MOUNTING BRACKET STEP 5 LOCATE AND REMOVE THE TAPE COVERING THE OBROUND HOLE IN THE BODY ROCKER PANEL STEP 6 ATTACH ONE OF THE 498124 CENTER MOUNTING BRACKETS TO THE BODY ROCKER PANEL USING THE 3 8 T BOLT WASHERS AND NUTS AS SHOWN FODI7 003 I 2 ...

Page 3: ... MOUNTING BRACKET TO THE BODY ROCKER PANEL USING THE 3 8 T BOLT WASHERS AND NUTS AS SHOWN STEP 9 LOCATE THE SQUARE HOLE IN THE UNDERSIDE OF THE BODY AT THE REAR OF THE CAB STEP 10 ATTACH 498564 PASSENGER SIDE REAR SUPPORT BRACKET TO THE UNDER SIDE OF THE BODY AND TO THE FLANGE OF THE MOUNTING BRACKET USING THE 3 8 T BOLT 3 8 X 1 1 4 HEX BOLTS WASHERS AND NUTS AS SHOWN FODI7 003 I 3 ...

Page 4: ...NUTS STEP 12 ALIGN THE SIDESTEP WITH THE BODY AND THEN TIGHTEN ALL MOUNTING NUTS AND BOLTS STEP 13 REPEAT THE ABOVE STEPS FOR THE DRIVER SIDE BRACKETS AND SIDESTEP FOR TECHNICAL OR WARRANTY INFORMATION CALL TOLL FREE 888 427 4466 FAX 714 672 0278 GO RHINO Products 591 W Apollo St Brea CA 92821 FODI7 003 I 4 ...

Reviews: