Go Power GP-ECO-80 User Manual Download Page 19

gpelectric.com  |  [page 19]

The Go Power! warranty is valid against defects in materials and workmanship for the specific product warranty period. It is not 

valid against defects resulting from, but not limited to:

•  Misuse and/or abuse, neglect or accident

•  Exceeding the unit’s design limits

•  Improper installation, including, but not limited to, improper environmental protection and improper hook-up

• 

Acts of God, including lightning, floods, earthquakes, fire, and high winds

•  Damage in handling, including damage encountered during shipment

A warranty shall be considered void if the warranted product is in any way opened or altered. The warranty will be void if any 

eyelet, rivets, or other fasteners used to seal the unit are removed or altered, or if the unit’s serial number is in any way removed, 

altered, replaced, defaced, or rendered illegible.

Warranty Return Procedure

Before contacting Go Power!’s customer service department, please read the “frequently asked questions” section of our website 

to troubleshoot the problem. If trouble persists:

1.  Call your Go Power!™ Technical Support team (1-866-247-6527) or
2.  Return defective product to place of purchase

Unless approved by Go Power! Management, all product shipped collect to Go Power! will be refused. Test items or items that 

are not under warranty, or units that are not defective, will be charged a minimum bench charge of ($50.00 US) plus taxes and 

shipping. A 15% restocking charge will be applied on goods returned and accepted as “new” stock.  

An RMA number (Return Materials Authorization number) from Go Power! Customer Service is required prior to returning any 

Go Power! Products. Go Power! reserves the right to refuse any items sent to Go Power! without an associated RMA number. To 

obtain an RMA number, please contact 

[email protected]

 or Telephone 1-250-380-0052 or Fax 1-250-380-0062 

worldwide – or Toll Free for US & Canada 1-866-247-6527.

  

Out of Warranty

Go Power! electronic products are non-repairable, Go Power! does not perform repairs on its products nor does it contract out 

those repairs to a third party. Go Power! does not supply schematics or replacement parts for any of its electronic products.

7.  WARRANTY RETURN PROCEDURE

Summary of Contents for GP-ECO-80























Reviews: