Pay EXTRA ATTENTION to the yellow, SAFETY WARNING sections of this
manual. These are very important to understand before you ride your Go-
Ped®.
This Product is not for sale, or resale, within the State of California
other than for CLOSED COURSE COMPETITION
•
All frame and engine parts are available through your authorized Go-Ped® reseller or the Go-
Ped® website at
www.goped.com
.
•
Use only manufacturer’s original equipment, replacement parts when servicing this unit. These
parts are available from your authorized dealer. The use of non-standard parts, or other
accessories or attachments not designed for this unit, could result in serious injury to the user or
damage to the unit. Adding any non-standard parts or accessories will void manufacturer’s
warranty
MAINTENANCE / PARTS
IMPORTANT! If you did not completely fill out and submit a warranty registration form to
your dealer upon purchasing your Go-Ped® product, return to your dealer immediately and
do so. If your form is not turned into the manufacturer, YOU DO NOT HAVE A WARRANTY.
AIR FILTER
•
The air filter, if clogged, will reduce the engine performance. Clean the Air
Filter every 4-6 hours of riding. Check and clean the filter element in warm,
soapy water as required. Dry completely before installing. If the element is
broken or shrunk, replace with a new one.
FUEL FILTER
•
When the engine runs short of fuel supply, check the fuel cap and the fuel filter
for blockage.
SPARK PLUG
•
Starting failure and misfiring are often caused by a fouled spark plug. Clean
the spark plug and check that the plug gap is in the correct range. For a
replacement plug, use the correct type.
•
REPLACEMENT PLUG IS A NGK CMR7A.
Note that using any spark plug other than those designated may result in engine
failing to operate properly or in the engine becoming overheated and damaged.
To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter
turn more with a socket wrench.
SPARK PLUG TIGHTENING TORQUE: 87-104 in-lbs
IMPORTANT CORRECT PLUG GAP IS .024 - .026”
WARNING
•
Periodically inspect the muffler for loose fasteners, any damage or
corrosion. If any sign of exhaust leakage is found, stop using the machine and
have it repaired immediately.
•
Note that failing to do so may result in the engine catching on fire.
SPECIAL ENGINE MAINTENANCE INFORMATION TO KEEP
YOUR GO-PED® AT ITS BEST PERFORMANCE AND
CLEANEST FOR OUR ENVIRONMENT.
WARNING Due to high operating temperatures, make sure that the engine has
stopped and is cool before performing any service to the machine.
THINGS TO REMEMBER
•
Keep air-intake opening clear of debris and do not touch the muffler or cylinder.
These parts get extremely hot from operation, and remain hot for a short time after the
equipment is turned off.
Model
Go-Ped® Speed Racer 40
Go-Ped® Speed Racer 40 T.S.
Interceptor
Length
43.5"
43.5"
Height
42"
42"
Folded Height
18"
18"
Width
16"
16"
Dry Weight
35 lbs.
40 lbs.
Engine Type
Single Cylinder / Two Cycle / Air-
cooled
Single Cylinder / Two Cycle / Air-
cooled / High Output
Engine Displacement
41.5 cc
41.5 cc
Ignition
CDI Control
CDI Control
Carburetion
Diaphram Type 12.2mm
Diaphram Type 13.5mm / High
Performance
Fuel
87 Octane Gasoline mixed with Two
Cycle Oil
92 Octane Gasoline mixed with Two
Cycle Oil
Fuel Capacity
1.5 litre
1.5 litre
Transmission
Centrifugal Clutch
Centrifugal Clutch
Chain Adjuster/Guard
Nylon Adjustable Chain Tensioner
Nylon Adjustable Chain Tensioner
Drive Type
Chain
Chain
Tire Type / Size
10" Pneumatic "TT" Street
10" Pneumatic "AT" Primo Durotrap
Front Brake
Disc / Caliper
Disc / Caliper
Rear Brake
Disc / Caliper
Disc / Caliper
Engine Starting
Recoil Starter
Recoil Starter
Tire Pressure
35 PSI
35 PSI
Max. Engine Power
Output
2.5 HP @ 7500 RPM
3.0 HP @ 8,000 RPM
Max. EngineTorque
1.7 ft. lbs. @ 5500 RPM
2.0 ft. lbs. @ 6,000 RPM
Engine Cutoff
Handlebar mounted Killswitch
Handlebar mounted Killswitch
Free Wheel Capable
Yes
Yes
