Original instruction manual
En
37 09/2019
adjust the tube to the desired height and tighten the
Ring.
•
If necessary, slightly loosen the Thumb Screw by turning
it anticlockwise. Slide the Switch Box down over the
Inner Tube and tighten the Thumb Screw. Make sure the
Thumb Screw is tightly secured.
The protective grille must be secured with the screw and the
nut.
Assembly of the screw and grill:
•
Position the rear grill against the front of the motor
housing with the handle uppermost,tighten it with nut.
•
Push the fan blade onto the motor shaft to set it well and
correctly.
•
Align the front grill and rear grill with clips.Fix the grill
parts with screws and nuts.
SPEED SELECTION:
Connect the plug to the power socket.
Your fan is equipped with a 4-position switch, to choose
among 3 fan speeds or turned off.
0:Stop
1:Low speed,
2:Middle speed,
3:High speed.
Operate the switch manually, by positioning the fan speed
you desired, as indicated above.
OSCILLATION:
Fan can oscillate from right to left, depending on your
convenience.
Button oscillation is placed at the top of the fan.
When the button is drawn, the fan does not oscillate.
When the button is pushed, the fan oscillates.
