OFFICE LIGHT
MAGGY INSTRUCTION
Rated voltage: 230V ~ 50Hz
Bulb: E27 max. 40W(exclude)
GB
Specification
Explanation of Symbols
Use step
Change the Light bulb
Cleaning
Important Safety Information
In order to keep the light have a long lifetime, please observe the following instruction.
Keep these instructions in order to read this information at a later time.
This lamp is suitable for indoor use only.
Keep this product out of reach of children and unauthorized persons.
WARNING: If the power cable is damaged, please contact the dealer or find a qualified person to replace it.
Before first time c onnec ting the produc t, please make sure that the voltage supply is same as the label indic ated.
Before replacing a bulb, turn off the power and wait until the lamp has cooled off.
Please use the correct bulbs that are specified on the label.
Please do not touch the bulbs with bare hands; if necessary use a soft cloth to touch the bulbs.
Please keep away from light combustible materials.
Do not look directly into the beam.
Disposal together with household garbage is expressly prohibited.
Disused luminaires can be returned at the point of sale.
Conforms to relevant European requirements for the product.
Class II Luminaire.
1.Unpack the light and place it on a flat surface
2.Use the correct bulbs that are specified on the labeland fasten the bulb properly in the lamp socket.
Please do not touch the bulbs with bare hands; if necessary use a soft cloth to touch the bulbs.
3.Insert
the
plug
into
the
socket.
4.Before the plug is pulled out of the socket, set the switch to "OFF"
JUMBO-Markt AG · Industriestrasse 34 · CH-8305 Dietlikon· Phone: +41
(
44
)
805
61
11
Before replacing a bulb, pull off the pulg and wait until the lamp has cooled off.
Please do not touch the bulbs with bare hands; if necessary use a soft cloth to touch the bulbs.
Please use the correct bulbs that are specified on the label.
Clean the lamp regularly. Before cleaning the light, make sure that the power Stecher
pulled and the light bulb is well cooled. The parts made of metal / plastic / ceramic / glass
with a softening duster (if necessary, slightly moistened) clean. Never use alcohol, solvents
or similar products. Wait untilTue lamp is completely dry before you plug it back in. Do not
forget that light off when not in use. If the light does not require long periods of time, pull the
power
plug.
This product is designed only for indoor use, do not use the lamp outside.
Correct disposal of this product: within the European Union, this product must not be disposed of in household waste.
Old machines contain valuable recyclable materials that should be sent for recycling and not to harm the environment or
human health from uncontrolled waste disposal. Please dispose of old machines via suitable collection systems or return
the unit for disposal at the store where you bought it.
