Original Instruction GB
9
ASSEMBLE
Warning!
Before assembly, make sure that the tool is switched off and unplugged.
Mounting the guard (Fig. 1 & Fig. 2 & Fig.3)
Place the guard onto the tool as shown. (Fig. 1)
Put the guard into buckle at side pointed to by black arrow in fig. 2.
(Horizontally push forward the guard, assemble the two hooks entirely into the slot of left/right
tool, check whether the two hooks have been fully inserted into the tool after assembly, there
must not be any exposed end)
Make the guard and tool matched well.
Fix the guard by using two self-tapping screws. (Fig.3)
Caution! Never use the grass trimmer without the guard. It is vital for your and other
peoples’ safety and for the good working order of the trimmer. The failure to observe this
safety regulation is not only dangerous but also annuls the guarantee terms.
