background image

How to Properly Use the Infant Cruizer

3. TO SECURE INFANT SEAT INTO

 INFANT CRUIZER

Step 1.

 Lock rear brake as shown in 

Picture D

, to keep 

Infant Cruizer from rolling.

Step 2. 

Place infant seat into the base of the Infant 

Cruizer in a similar manner to placing it in its' car 
seat base.  MAKE SURE YOU HEAR THE FAMILIAR 
"CLICKS" THAT SECURE THE INFANT SEAT TO THE 
BASE.

Step 3. 

Lift infant seat by its handle to make sure it 

is connected properly, as shown in

 Picture E

.  Infant 

Cruizer should lift with the infant seat. 

!

WARNING

Avoid serious 

injury from falling or sliding out. ALWAYS USE 
THE HARNESS SYSTEM PROVIDED WITH YOUR 
INFANT OR TODDLER SEAT AS INSTRUCTED BY 
THE MANUFACTURER. 

4. TO REMOVE INFANT SEAT

FROM INFANT CRUIZER

Engage rear brake.  Pull up on the release mechanism 
of the infant seat and lift infant seat handle with your 
other hand; just like when removing your infant car 
seat from the car seat base.

5. TO FOLD THE INFANT CRUIZER

Step 1.

 Push Button on top of handle and close most 

of the way, leaving approximately 3 or 4 inches of 
opening.

Step 2.

 Squeeze top of spring latch with thumbs as 

shown in 

Picture F.

Step 3.

 Swing handle all the way to the base and 

close handle all the way.  

Step 4.

 Lock handle into the body of the Infant Cruizer. 

Make sure handle disks are locked into the docking 
position of the body as shown in 

Picture G. 

 

HOW TO PROPERLY USE THE INFANT CRUIZER

13

Picture E

Picture F

Picture G

Summary of Contents for IC-A















Reviews: