
1. Please read this user manual carefully before riding.
2.
WARNING.
Protec
ti
ve equipment should be worn. Not to be used in tra
ffi
c.
3. Must be completed by an adult, make sure all parts are
ti
ghtened and secure before every ride.
4. Dispose of all packaging material to prevent any danger of child consump
ti
on.
5. This product is designed for children 2-9 years. Maximum weight capacity is up to 50 kg.
6. The ba
tt
ery must be charged for approximately 2.5 hours prior t
o fi
rst use.
7. Adult supervision is recommended while in use.
8. Only one rider must ride this scooter at all
ti
mes.
9. Cold water must ONLY be used. It is recommended to add approximately 100ml of water in to each engine tank, if the
tank is over
fl
owing it may cause the engines to leak. (water or leaking water will not cause any danger to the rider or
damage the scooter).
10. It is not advisable to replace any part of the product as it may cause damage to the rider and the product may not
func
ti
on correctly.
11. Please check every connec
ti
on & parts regularly and make sure they are all
ti
ght and secure before every use.
12. Please check every screw & part and make sure they are all
ti
ght and secure before every use.
13. Rider must wear protec
ti
ve clothing at all
ti
mes. Including as a safety approved helmet, gloves, elbow & kneepad.
14. Rider must wear closed shoes while riding.
15. Do not ride scooter in wet and or uneven terrain condi
ti
ons such as gravel, pot holes and bodies of water.
16. Please check your local laws for informa
ti
on about areas where the scooter can be ridden. Do not ride scooter on roads.
17. Not to course any harm or damage, do not ride scooter near stairs or
fi
re or any other forms of strongly heated areas.
18. Ride scooter in safe and supervised areas and where the law is permi
tt
ed in your state.
19. It is strongly advised not to ride scooter at night and in low visibility areas.
20. No stun
t
ng, tricks, dragging, towing while riding this scooter.
21. It is important to prac
ti
ce and develop skills to avoid falling over while riding.
22. The power must be switched o
ff
when scooter is not in use.
23. Do not replace or move any part on the scooter that does have any movement.
24. Do not allow scooter to get wet or le
ft
outside in the rain as it will damage to the ba
tt
ery and wire system.
SAFETY WARNING
1. INSTALLATION
1. Check you have all these parts before installa
ti
on.
2. Install the T-Bar/Handle Bar:
Install the T-Bar/ Handle
Bar into the front insert
of the Scooter Deck/Body.
Be cautou s of the
dir
ec�on
the T-Bar/Handle
is to be inserted correctly.
If not inserted correctly it
could result in the
T-Bar/ Handle Bar
discon
nec�
ng from the
Scooter Deck/Body.
D
D
E
C
B A
FIXED HOLE
FIXED HOLE
1. Change the height of the handle:
(a) Open “E” set up valve and set
the handle
al�t
ude according to
the height of the rider.
Press spring switch, move up to
fi
xed hole
①
, or down to
fi
xed hole
②
.
2. Lock “E” step up valve.
If you cannot open or lock it,
you can use the wrench to do it.
1.
T-bar/ handle bar
USB charger cable
User manual
Scooter deck/body