34
System Toolbox
Chime Options
On doors and windows monitored by sensors, the system can sound a chime to announce that the
door or window was opened. Sensors can also be set to have the Control Panel say the name of the
opening. The chime and voice announcements only sound while the system is disarmed.
At the time of installation, the installer sets up each sensor’s standard chime option. The person
with the Master User Code can change the chime options for each sensor to further customize the
system as desired.
✓
NOTE:
As a global system option, the chimes for all the system’s sensors can be turned
on or off using the
CHIME
check box on the Menu Screen.
To setup the chime options individually for each
sensor, use the following steps:
On the Home Screen, press
1. SECURITY
.
On the Security Screen, press
2. MENU
.
Note the two check boxes on the Menu
3.
Screen. The
CHIME
check box button
turns the chimes on or off for all the
system’s sensors. The
VOICE
check box
button turns the voice announcements
for the system’s messages on or off
(except alarm voice messages).
On the Menu Screen, press
4. TOOLBOX
.
On the Toolbox Screen (1 of 3),
5.
press
CHIME SETUP
.
Enter the Master User Code to
6.
setup the chimes for the sensors.
The Chime Setup Screen will display
7.
each of the installed sensors that can
chime and the option currently set for
the sensor. Press the sensor button to
change the sensor’s chime options.
There are six chime options for each
8.
sensor. Check the option that you
want for the sensor then press
OK
.
CHIME OPTIONS
✓
Di
sab
led
✓
Voice Only
✓
Voice with ding-dong
✓
Lo
u
d ding-dong
✓
Lo
u
d ding-dong with voice
✓
Ding-dong
Press
9. BACK
when fi nished.
Menu Screen Global Chime Option Box
Toolbox Screen One
Chime Setup Screen
Chime Option Screen
