GNS 5892 StarterKit
manual
confidential
information
manual
© GNS-GmbH 2012
V 0.10, Feb. 28
th
2013
2
Introduction
This manual shows, how to connect the GNS 5892 Starter Kit to a PC in order to verify GNS 5892
module performance and test supported features.
For technical specification, please refer to the
GNS 5892 datasheet
.
GNS 5892 is one of the smallest ADS-B receiver modules for 1090MHz “virtual radar” monitoring.
The high dynamic signal processing circuit allows ADS-B data reception from near field to wide
range simultaneously.
The module integrates a sensitive RF front-end, signal processing , a high speed data decoder and
an output uart that can be easily connected to a host processor.
Connected to a PC, all ADS-B data is routed to the miniUSB port. A simple command interface is
used to carry out the necessary settings on the module.
GNS 5892 Starter Kit Features
Onboard USB2UART bridge for PC connection
5V DC input via mini USB
LED “frame indicator”
SMA antenna connector
Downloaded from
Downloaded from
