True Buffer Bypass (TBB)
When the effect is turned off
,
input signal passes to output through an
active (“opamp”) buffer, and a mechanical switch. Buffer lowers signal's
impedance, preserving its level and high tone contents. Mechanical
switches are used to eliminate the need for some electronic components
that usually degrade sound's quality in “pure-electronic” bypass pedals.
Please note that this bypass system requires power to work. Signal will
not pass if you are not using an adaptor or battery.
2 in 1
GNI’s Phaser & Flanger is a true two-in-one product, allowing you to use
both modulations at the same time. Incredible results can be achieved
this way. Note that GNI’s design allows you to comfortably press both
footswitches at the same time.
Input and output
Input jack accepts signals from the guitar or another effects unit. Output
jack is used to connect the pedal to the amplifier or another device. In
some cases these jacks serve as power switches, meaning your unit may
not turn on unless they are connected. This is an extra feature to save
battery in case pedal is not being used.
ADVICE:
Cables are passive components with non-
negligible capacitance. They can possibly interfere
with sound's signal. In order to achieve better results,
make your connections with good quality cables.
Summary of Contents for Phaser & Flanger
Page 1: ...Phaser Flanger s user s manual ...
Page 8: ......
