5
Connect the power cable to the fuse box terminal inside the vehicle.
(The connected terminal should be one which is always supplied power even
when ACC power is turned o
ff
, such as emergency lights and/ or door racks.)
Otherwise if using a cigar power cable, plug it directly into the vehicle cigar
socket.
6
Connect the other side of the power cable to the DC-IN labeled port of the
front camera.
3-Wire Power Cable
Connect
VCC
to current fuse at vehicle start-o
ff
Connect
ACC
to a fuse that does not
fl
ow when the vehicle is switched o
ff
Connect
GND
to ground on the vehicle’s body
Rear cable [CAM1]
DC-IN
GNET strongly recommends having an experienced installer with the proper knowledge of
electrical systems install the device. Incorrectly wiring the power cable can result in damage
to the vehicle or the battery and can cause bodily injure.
CAUTION
01. BEFORE USE
INSTALLATION
10
Summary of Contents for G-ON4
Page 1: ...2CH 4K UHD FHD HDR DASH CAM USER MANUAL ...
Page 64: ......
