background image

WARRANTY 

GNC Industries, Inc., P-Series Pumps are warranted by GNC Indus-

tries,  Inc.  GNC  Industries,  Inc.  will  repair  or  replace  (at  GNC  In-

dustries, Inc.’s option) any part or assembly, free of charge, if that 

part or assembly fails within twelve months (1 year) from the date 

of purchase, provided the failure is due to an unmistakable defect 

in material or workmanship.  

No  allowance  will  be  made  for  consequential  damage,  labor  or    

expenses incurred as the results of a proven defect.  In no event 

will GNC Industries, Inc.  be liable for any  loss of profits or other 

consequential  damages,  even  if  GNC  Industries,  Inc.  has  been    

advised of the possibility of such damages. 

GNC  Industries,  Inc.  assumes  no  responsibility  for  accidents  or   

injuries resulting from maintenance or adjustment of product while 

product is in operation. 

Since  GNC  Industries,  Inc.  has  no  control  over  the  operational 

techniques  or  chemicals  used,  GNC  Industries,  Inc.  assumes       

no  liability  for  the  consequences  of  the  use  or  misuse  of  any 

equipment by the purchaser, their employees or others. 

Maximum  operation  speed  and  pressure  is  specified  in  individual 

and applicable instructions. 

GNC  Industries,  Inc.  reserves  the  right  to  improve  any  product 

without being obligated to provide that change on equipment sold 

and/or shipped prior to the product change. 

Modification of equipment voids all warranties written or implied. 

Page 1 

[email protected] 

Summary of Contents for P550













Reviews: