B250-XTS User Manual
PAGE 15
RESET PAIRED DEVICES LIST
CALL WAITING / REJECTING A CALL
The headset must be on to perform this function .
To reset the headset’s internal paired devices list, hold the headset near your ear .
Press and hold the Volume Up and the Volume Down buttons simultaneously for
approximately 5-6 seconds until two low tones are heard .
This procedure may be necessary if the headset will not pair or connect to a device .
NOTE: Pairing information for devices previously paired with the headset will be lost.
Headset will need to be paired to the device after reset has occurred.
• To accept an incoming call while talking on an active call, press the MFB
twice to put the active call on hold .
• To switch to the original call, quickly press the MFB once .
NOTE: Depending on your phone’s programming, you may be able to switch
between calls from the phone’s call handling menu.
• To reject an incoming call while on an active call, press and hold the MFB
for 2 seconds .
The incoming call will go to voicemail .
