BlueParrott B450-XT User Manual
PAGE 15
ADVANCED FEATURES AND FUNCTIONS
(continued)
• To use Volume Up to mute the headset microphone while on a call, press and hold
the Volume Up button for 1-2 seconds . To unmute, press and hold the button again
for 1-2 seconds .
• While muted, a reminder tone will sound every 10 seconds .
Transferring Audio
To transfer audio from the headset to the cell phone while on a call, press and hold the
Volume Down button for 1-2 seconds . The audio will transfer to the phone . Repeat to
transfer audio back to the headset . When audio is transferred to the phone, the light
on the headset will be off until audio is transferred back to the headset .
Turning Headset Indicator Lights On/Off
A
quick
press of the Volume Up and Volume Down buttons together will turn the
headset indicator lights off . Repeat to turn the indicator lights on .
When powering on the headset, the indicator lights will be in the same state as they
were when last powered off .
Reset Headset Paired Devices List
This will reset, or clear the headset’s internal paired devices list . The headset must be
on to perform this function .
1 . Power on the headset . It does not matter if it connects to any devices .
2 . Hold the headset near your ear and press and hold the Volume Up and the Volume
Down buttons together for approximately 6-10 seconds until two low tones are
heard .
3 . Power off the headset . The pairing memory is now clear and will need to be paired
to any desired devices before it can be used with them .
Reset Parrott Button Defaults
This will reset or clear the headset’s internal paired devices list and will also restore
the Parrott Button’s factory defaults (voice command and mute) . The headset must be
on to perform this function .
1 . Power on the headset . It does not matter if it connects to any devices .
2 . Hold the headset near your ear and press and hold the Parrott Button and the
Volume Down buttons together for approximately 6-10 seconds until you see two
quick purple flashes on the MFB .
3 . The headset Parrott Button is reset and the pairing memory is now clear . The
headset will re-enter pairing mode . If you are not ready to re-pair to your device,
power off the headset .
