GN Resound V80, Operating Instructions Manual, Page: 7 / 20

7
You can always return to the basic programme by turning your
instrument off and then on again (see “On/Off Function”) or
by placing it in stand-by mode and then returning to its nor-
mal function mode (see “Stand-by Function”)
Your ReSound V set-up
Basic
Telecoil ( ) Microphone/Telecoil ( )
Telecoil ( )
Direct Audio Input ( ) Direct Audio Input + M ( )
Stand-by Function
To put the instrument into stand-by mode, hold down the
mode selector for 5 seconds. You will hear a series of beeps,
and the device is now in stand-by mode. Before returning
to functional mode, you will need to wait approximately 5
seconds. After waiting, press the mode selector once. Please
note that the instrument is using a small amount of power
when in stand-by mode.
On/Off Function
When the battery compartment
of your ReSound V instrument
is fully closed, the instrument is turned
on and programme 1 will be activated.
To turn the instrument off, use your
fingernail to open the battery
compartment. Whenever you
are not wearing the instrument,
remember to turn it off
to reduce battery consumption.