Doc. No. 0012680 rev. E
Page 13 of 16
Technical Manual for Discover V BTE
Ampli
fi
er
When replacing the switch p/n
70927017, cut the two terminals
as shown
Mount the sw supp on the sw board.
Mount the switch and bend the terminals
onto the soldering points
Solder the terminals and apply
CH-6 p/n 75925308 in the 2 holes
Apply Coat p/n 1908-209 as indicated in pictures 4-5.
The switch complete mounted (as shown in pic. 3) is also available as p/n
15287500.
How to replace:
Disconnect the sw board wing and the points which con-
nect the sw board to the main board. Lift up the defective part and place the
new one into the housing. Connect the new sw board to the main board and
the sw board wing to the bat spring (+)
2
Sw board
Sw supp
3
CH-6
Points which con-
nect the sw board
to the main board
Sw board “wing”
to bat (+)
5
4
1