BlueParrott B550-XT User Guide
PAGE 8
GETTING STARTED
On/Off/Standby
Turn Headset On:
Hold down the MFB for approximately 2-3 seconds until
you hear a voice prompt, “power on .” The red light will flash once every
second .
Turn Headset Off (conserves battery power):
Hold down the MFB for
approximately 4–5 seconds until you hear a voice prompt “power off .” A red
light will flash 4 times and the headset will turn off .
Standby Mode:
Once the headset is turned on (after the initial pairing), it will
attempt to connect to the last device that it was paired with, putting itself
into Standby Mode .
Pairing with a Phone
When you turn your B550-XT on for the
first time, or if its Paired Device List has
been cleared, it will go into pairing mode
automatically . You can pair the headset using
NFC or manually .
NFC (One-Touch) Pairing
1 . Make sure that NFC is enabled on your cell
phone .
2 . Place the NFC zone of your cell phone
against the NFC zone of the headset and
hold them together until your cell phone
registers the headset .
3 . Follow the prompts on your cell phone to
complete pairing .
Note: NFC and One-Touch Pairing are
dependent on your cell phone. The size and
sensitivity of your phone’s NFC zone and the
specific way to connect the headset may vary
between devices.
NFC Zone
